- ±0.3°C accuracy
- CAL CHECK®
- Ideal for spot checks
- Fast and accurate results
If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view!
Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F).
The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Order Information: HI 98501 (Checktemp®C) is supplied with penetration probe, protective cap, battery and instructions.
Range | -50.0 to 150.0°C | |
Resolution | 0.1°C | |
Accuracy | ±0.3°C (-20 to 90°C) ±0.5°C (outside) | |
Probe | fixed stainless steel 105 x dia 3 mm (4.1 x dia 0.1″) (penetration) | |
Battery Type / Life | 1.5V / approximately 3000 hours of continuous use | |
Environment | 0 to 50°C (32 to 122°F); RH max 95% | |
Dimensions | 66 x 50 x 25 mm (2.6 x 2.0 x 1.0″) – meter only | |
Weight | 50 g (1.8 oz.) – meter only |