HI8614N pH – Transmitter with 4 to 20 mA Ouput

Water resistant

• Loop powered
• Automatic Temperature Compensation

 

The HI 8614N is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector. The signal is then processed by a special high-impedance amplifier, which transmits an output current directly proportional to the input signal but independent of changes in load or cable capacitance.

Calibration is performed by the adjustment of two independent trimmers — slope and offset.

Temperature compensation is performed by the transmitter’s ATC (Automatic Temperature Compensation) circuitry when measurements are taken with a temperature probe attached; if ATC is not required, it is also possible to substitute a fixed resistor for the temperature probe. The transmitter can be connected to HANNA controller
HI 8510, HI 8710 or HI 8711, recorders, computers or any data monitoring device that accepts 4 to 20 mA input.

 

Order Information:
HI 8614N is supplied with instructions.

Product Manual:

HI 8614 (Process Instrumentation)

Specification :

Range		0.00 to 14.00 pH; 4–20 mA
Accuracy @ 20°C		±0.02 pH; ±0.02 mA
Calibration		offset: ±2 pH; ±2.2 mA; slope: 86 to 116%; ±0.5 mA
Temperature Compensation		fixed or automatic from 0 to 100°C (32 to 212°F) with HI 76608 probe
Input Impedance		1012 Ohm
Recorder Output		4-20 mA (isolated)
Protection		IP65
Power Supply		18-30 VDC
Load		max 500 Ohm
Environment		0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions		165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’)
Weight		1 kg (2.2 lb.)